VARUNA filter presses are available in various sizes to meet the growing needs of chemical and oil mill industry. The plates of the filter presses are so recessed that when two plates are closed together a chamber is formed. Each plate has a hole in the center for feeding oil. Pyramids are formed to increase the filtering area for better filtration.

Tailored filter cloth is places over each plate and fastened at the center with cast iron nuts. The liquid is pumped into the press and then forced through the cloth to fill inside the chambers of the plates. This collected oil gets out of the plates through the pet cocks provided on the outside at the bottom.

VARUNA filter press is provided with plunger pump manufactured according to sizes and number of pistons required. These pumps are fitted with ball bearing for smooth running. Best Quality of check valves are fitted inside. Pumps are supplied with both flat belt and v-belt drive. Double piston plunger pumps are manufactured for higher capacity.

Some Special Features of Filter Press & Pump

All the plates, frames & stands are cast from heavy duty close-grained cast iron.

Plates of the filter press are tested for casting defects before machining.

Grinding process is done on the faces of filter plates and frames to avoid leakages at high pressure.

MS Flat bars provided at the sides are designed to stand extra weight.

The tightening screw is made from solid steel and has course pitch square threads for opening and closing of press.

Heavy duty Plunger Pumps in various sizes fitted with gun metal check valves are provided.

Accessories provided with filter press are petcocks, oil tray, one rod and a spanner (for filter cloth nuts).

Plunger pump is supplied along with safety valve, air vessel, pressure gauge, pulley, belts & motor (optional)